Complete Clinic Setup in the UAE — From Licensing to Commissioning

Clinic Setup in the UAE

Complete Clinic Setup in the UAE: Licensing to Commissioning | Keemz

+971 52 266 5717

Get a Quote

Complete Clinic Setup in the UAE — From Licensing to Commissioning

Opening a medical or dental clinic takes more than a location and an interior. Licensing, healthcare planning, MEP engineering, fit-out, medical equipment and commissioning all have to work together — and Keemz coordinates that journey as one project, from the first approval to the day your clinic is ready for patients.

Get a Free Quote on WhatsApp

Call +971 52 266 5717

MOH & EDE Approved

All 7 Emirates

Established 2016

Setting up a clinic usually means dealing with an architect, a licensing consultant, an MEP engineer, a fit-out contractor and one or more equipment suppliers — separately. Keemz brings these pieces together under one coordinated project, so licensing, design, construction and medical equipment move in step instead of catching each other up.

From Clinic Licensing to Complete Commissioning

Whether you're opening a new dental clinic, medical centre or specialty clinic, or expanding an existing facility, Keemz supports every major stage of the journey.

Phase 1 Plan & Approve

01

Clinic Licensing & Approval Support

Establishing the correct regulatory pathway before major construction begins.

Licensing requirements Authority approvals Activity planning Layout submission Documentation follow-up Inspection prep

02

Feasibility & Clinic Planning

Assessing the services the clinic will offer and the functional needs that follow from them, before the layout is drawn.

Treatment rooms Specialties Patient flow Staffing Clinical workflow Future expansion

03

Healthcare Architectural Planning

Arranging every area around patient movement, staff workflow, privacy, infection control and equipment positioning.

Reception & waiting Treatment rooms Sterilisation Waste areas Accessibility

Phase 2 Engineer & Build

04

MEP Engineering

Coordinating MEP requirements together with the clinic layout and medical equipment plan, before fit-out starts.

HVAC Electrical loads Medical gases Suction & compressor lines Data & CCTV Fire safety

05

Clinic Interior Design

Balancing patient comfort, brand identity and clinical practicality across every space.

Reception design Clinical cabinetry Lighting & flooring Glass partitions Signage & branding

06

Complete Clinic Fit-Out

Moving into construction once designs and approvals are finalised, with architecture, MEP and equipment kept aligned throughout.

Civil & partitions Joinery Electrical & HVAC Medical gas infrastructure Final finishes

Phase 3 Equip

07

Medical Equipment Planning

Planning equipment before MEP and fit-out are finished, since every major device can influence room design.

Power & water Drainage & suction Compressed air Mounting & clearance

08

Medical & Dental Equipment Supply

Supplying equipment across the facility through one coordinated partner, instead of multiple vendors.

Dental chairs X-ray & RVG Autoclaves Patient monitors Ultrasound & ECG Medical furniture

09

Equipment Installation

Verifying infrastructure against each device's requirements before installation and hand-over for operation.

Power & water checks Data points Positioning Mounting

Phase 4 Commission & Open

10

Testing, Training & Commissioning

Making sure equipment isn't just delivered, but properly tested, documented and ready for daily use.

Functional checks Calibration coordination Staff training Warranty documentation

11

Final Inspection Preparation

Reviewing the facility carefully before the healthcare authority's final inspection.

Layout compliance Utility connections Documentation Snag rectification

12

Clinic Commissioning & Handover

Designed, approved, constructed, equipped, installed, tested, commissioned — ready to operate.

Why Choose Keemz for Your Clinic Setup?

Managing architects, licensing consultants, MEP engineers, fit-out contractors and equipment suppliers separately creates delays and communication gaps. With Keemz, these elements are coordinated as one healthcare project.

One Point of Coordination

A single team coordinating the key stages of your clinic setup, instead of multiple disconnected suppliers.

Medical Equipment Expertise

Equipment requirements are considered from the beginning of the clinic design, not bolted on at the end.

Equipment + MEP Coordination

Power, drainage, suction, air and water are planned around the equipment early, so nothing is retrofitted later.

Complete Project Approach

Licensing, planning, design, MEP, interiors, fit-out, medical equipment, installation and commissioning, connected as one scope.

Practical Healthcare Planning

Patient movement, doctor workflow, storage and maintenance are considered for how the clinic will actually run after opening.

One Partner From Start to Finish

From an empty space to a fully equipped facility, Keemz stays involved throughout the project.

Your Clinic. One Complete Solution.

Planning a dental clinic, medical clinic, polyclinic, specialty or aesthetic clinic, diagnostic facility or healthcare centre? Keemz can take the project from licensing and planning through fit-out, medical equipment and final commissioning.

Licensing →

Planning →

Design →

MEP →

Fit-Out →

Interiors →

Medical Equipment →

Installation →

Testing →

Commissioning →

Opening

Get a Free Quote on WhatsApp

Call +971 52 266 5717

Common Questions

What does Keemz coordinate in a clinic setup project?

Licensing support, healthcare planning, architectural layout, MEP engineering, interior fit-out, medical equipment supply, installation, testing and final commissioning — under one project instead of separate vendors.

Can Keemz plan medical equipment before construction begins?

Yes. Equipment requirements are planned early so the power, water, drainage, suction and other services each device needs are built into the MEP design and fit-out from the start.

What types of clinics does Keemz support?

Dental clinics, medical clinics, polyclinics, specialty and aesthetic clinics, diagnostic facilities and healthcare centres across the UAE.

Does Keemz supply and install the medical equipment as well?

Yes. Keemz supplies dental chairs, imaging systems, sterilisation equipment, patient monitors and general medical equipment, then coordinates installation, testing, staff training and commissioning.

Which areas of the UAE does Keemz serve?

All seven emirates, with showrooms in Dubai and Ajman, and MOH and EDE approvals in place.

Keemz Medical Equipment Trading LLC

Complete healthcare & clinic setup solutions across the UAE — licensing, planning, MEP, fit-out, medical equipment and commissioning under one coordinated project.

Contact

+971 52 266 5717

+971 56 992 3738

WhatsApp: +971 56 992 3738

info@keemzmed.ae

www.keemzmed.com

Showrooms

Dubai — Al Riggah Building G2, Abu Baker Al Siddique St, near Deira Clocktower, Al Khabaisi, Deira

Ajman, UAE

© 2026 Keemz Medical Equipment Trading LLC. All rights reserved.

MOH & EDE Approved · Serving all 7 Emirates